800-820-2529   

Clockaudio 专业麦克风系统

  1. 首页
  2. 产品中心

最新案例

TPG成立于1994年，并在10个国家设有17个办事处。TPG对杠杆收购、少数股权投资、合资、业务分拆及企业重组等私募股权投资活动拥有丰富的经验。TPG在欧美市

Clockaudio Clockaudio 高性能易安装界面麦克风 C 004E-RF

Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. The d...

> 产品中心 > Clockaudio 专业麦克风系统 > Clockaudio CS界面话筒系列 >

Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. The design accommodates both side and bottom cable exits which means it can be used for either mobile or permanent applications. Inbuilt Phantom Power Adaptor.

High performance easy installation Boundary Layer Microphone..

  • Immune to RF artefacts.
  • Boundary Layer single element condenser Microphone
  • Half Cardioid Polar Pattern.
  • Fully balanced
  • Engineered in high quality brass.
  • Inbuilt Phantom Power Adaptor.
  • Finish: Black Nextel® or Satin Nickel
     

 

CS1-RF
Application Boundary Layer Microphone with a Half Cardioid Polar Pattern. Designed to be placed in the middle of the conference table, with the participants facing the condenser element. The design accommodates both side and bottom cable exits which means it can be used for either mobile or permanent applications. Inbuilt Phantom Power Adaptor. 
Type Condenser (back electret).
Polar Pattern Half Cardioid.
Frequency Response 50 Hz - 18 KHz.
Sensitivity -37dB +/- 3dB at 1 KHz (0dB = 1 V/Pa).
Impedance 200 Ohms.
S/N Ratio 69dB (A).
Maximum Sound Pressure Level 120dB 1% THD.
Power Requirements 9 - 48 volts Phantom Power.
Termination Open ended.
Finish Black Nextel® or Satin Nickel.
Dimensions 62mm (2.4") x 44mm (1.7") x 22mm (.87").
Weight 452g (16oz.
Architects and engineer specifications The Condenser Microphone is of a single element Boundary Layer type, with a Half-Cardioid Polar Pattern. The Microphone is be made from solid brass, and capable of being permanently mounted with the use of an M 10 x 1 hollow bolt, nut and washer. The Microphone includes a 6.6 ft (2 metre) cable with Open-Ended termination. Also included is an integral Phantom Power Adaptor (PPA-RF) which accepts 9 to 48 volts DC. The Phantom Power Adaptor includes filters which will eliminate all GSM frequencies from 800 MHz - 1.2 GHz. Frequency response: 50Hz to 18KHz; Sensitivity –37dB +/- 3 dB @ 1KHz (0dB = 1V/Pa) Impedance 200 Ohms. Total harmonic Distortion (THD) at an operating level of 120dB shall be no greater than 1 %. Finish: Black Nextel® or Satin Nickel.